Automatic High Speed Plastic Film Rotogravure Printing Machine

Product Detail

 

Technical parameter (Based on 6 colors)

Model	DNAY800C	DNAY1100C
Printing width	800mm	1100mm
Material width	830mm	1130mm
Printing cylinder diameter	f100-350mm	f100-350mm
Printing speed	150m/min	150m/min
Unwind diameter	600mm	600mm
Rewind diameter	600mm	600mm
Register accuracy	±0.1mm	±0.1mm
Total power	140KW	150KW
Weight	18000KG	19000KG
Dimension	12000*3800*2800mm	12000*4100*2800mm
Video link	https://www.youtube.com/watch?v=ZCPMjVlPg1A




Feature:
1. Seven servo motor controlling system which can make tension close loop control, so we can make the material waste to the least,during one year's running,you can save huge cost.




2. Unwind double station turret with air shaft,two servo motor control,auto splicing and cutting.




3. Rewind double station turret with air shaft,two servo motor control,auto splicing and cutting.




4. Independent chassis without connection,the bolt will be installed into the ground to make machine more stable during high speed running.




5. Pneumatic heavy type doctor blade has a longer life and it can remove extra ink completely from   the printing cylinder to make the printing more clear and shinning.





6. Shaftless pneumatic printing cylinder installation which can save much time




7. Ink is circulated automatically,special ink plate design can make ink circulate more easily 




8. Automatic computer register with video inspection.

  

9. It is equipped with double long register screw which has longer moving distance to make the registration more accurate.




10. Independent drying and suction exhausting system, air circulated, max recycled rate 50%, 

waste air eliminating tunnel. External blower increase the air amount for a better heating.




11. Unwind 2 floating roller, rewind 2 floating roller to micro adjust the tension during machine running




12. Oven is pneumatic open and close which is convenient for material guiding.

  

13. Assisted oven install on the top of last printing unit to completely dry the printing material.




14. Turning bar can be installed to do reverse printing for PE tube material.




15. Water cooling roller to cool the printing material after heating




16. Ultrosonic EPC device can be installed on the top of unwind part








Printing sample: