Manual Paper Roll Paper Bag Photo Rotogravure Printing Machine

Product Detail

 

Technical parameter (Based on 8 colors)

Model	DGAY1050A
Printing width	1050mm
Material width	1080mm
Printing cylinder diameter	100-350mm
Printing speed	220m/min
Unwind diameter	600mm
Rewind diameter	600mm
Register accuracy	Vertical and horizontal both±0.1mm
Total power	380KW
Weight	40000KG
Dimension	16000*4450*3145mm
Video link	https://www.youtube.com/watch?v=KlO2ufPeMmk




Feature:

1.  7 servo motor controlling system

   
   

2. Unwind double station turret with air shaft, servo motor control, automatic splicing and cutting. Equipped with pressing roller to press on the roll. Equipped with static brush to remove static electric during running.




3. Rewind double station turret with air shaft, servo motor control, auto splicing and cutting.Equipped with pressing roller to press on the roll. Equipped with static brush to remove static electric during running.

  

4. Independent chassis without connection, the bolt will be installed into the ground which make machine more stable during high speed running.




5. Pneumatic heavy type doctor blade remove extra ink completely from the printing cylinder




6. Pneumatic printing cylinder installation with shaft




7. Ink is circulated automatically by ink pump




8. Special ink plate design make ink circulate more easily.




9. Automatic computer register both vertical and horizontal, video inspection

  

10. Double long register screw make registration accurate.




11. Independent drying and suction exhausting system, air circulated, max recycled rate 50%, waste air eliminating tunnel. External blower increase the air amount for a better heating.




12. Unwind 2 floating roller, rewind 2 floating roller to adjust the tension.




13. Oven is pneumatic open and close.




14. Assisted oven install on the top of last printing unit to completely dry the printing material.




15. It can be installed with turning bar to realize reverse printing.




16. Water cooling roller to cool the printing material after heating




17. It can be installed with EPC device on unwind part especially for PE material




18. It can be equipped with hot air dryer system which can max save power 80%.












Printing sample: